Grouts & Anchors
PRODUCT DESCRIPTION

CIKO grout factory blended powder consisting of high quality plasticizer, non-mettalic filler single component when added to water produce flowable mix to fill gap while shrinkage is contained, the addition of expansion agent control volume change during plastic and early hardened state. For higher strength and fine gap subject to movement such as under heavy equipment and micro cracks, Epoxy base CIKO Grout EP offer high early and final strength to withstand static and dynamic load .

 

TECHNICAL INFORMATION


Cementitious Grouts

 


TDS-Download

CIKOgrout BB80

Ready to use non-shrink, high flow cementitious grout for filling gaps between similar or dissimilar substrates having larger area. Suitable for large size base plate grouting and rail grouting.

25 kg bag yield 12.5 liters of grout

1

CIKOGrout GP*

Ready to use general purpose non-shrink, cementitious grout for interior and exterior use for filling gaps between similar or dissimilar substrates. CIKOgrout GP* is suitable for anchoring pre-cast columns, anchor bolts and fence posts, etc.

25 kg bag yield 13.0 liters of grout

1

CIKOGrout GP

General purpose, non‐shrink, free flow, high strength cementitious grout for filling gaps between similar or dissimilar substrates.

25 kg bag yield 13.0 liters of grout

1

CIKOGrout HIFO

Non‐shrink, free flow, high strength cementitious grout for filling gaps between similar or dissimilar substrates having larger area. Suitable for large size base plate grouting and rail grouting

 

25 kg bag yield 13.0 liters of grout

1

CCIKOgrout UW

Anti-Washable Non Shrink Cementitious Grout for Under Water application

20 kg bag yield 11.5 liters of grout

1

CIKOGrout CON

Non‐shrink grout admixture suitable for anchoring precast columns, anchor bolts, general void filling etc.

1 – 2% by weight of cement

1

CIKOgrout ConExtra

Expanding and Non-shrink grout admixture

1 – 2% by weight of cement

1

CIKOGrout PC

Cementitious pile cap resurfacing grout

25 kg bag yield 13.0 liters of grout

1

CIKOCable grout

High performance cable grout

25 kg bag yield 17.0 liters of grout

1

CIKOBlockfill

Pre-blended mix containing cementitous materials, graded aggregates and polymer additives for improved workability. It is particularly designed to fill masonry cavities.

50 kg bag will yield to 27 to 28 Liters of fresh mortar

1

 

Epoxy Grouts

 

 

CIKOGrout ING

Solvent free two‐component epoxy resin based low viscosity injecting grout recommended for filling cracks in concrete. Suitable for structural concrete repair

4.0 liters pack

1

CIKOGrout EP

Pure Epoxy Resin Chemical Anchor

-

1

CIKOGrout EPC

Epoxy based pile cap resurfacing grout

25 kg bag yield 12.5 liters of grout

1

CIIKOkey Grout EP.pdf

Epoxy resin based, high strength dowel grout

Available in 1.0 and 4.0 liter packs

1

CIKOdowel Grout

Epoxy resin based, high strength dowel grout

Available in 1.0 and 4.0 liter packs

1

BCR 470 Epoxy 21

a two components epoxy resin grout for both horizontal and vertical anchoring in concrete, solid masonry, etc.
It is specially formulated to provide a permanent installation of reinforcement bars and rods into substrate.

470ml side by side cartridge. Other cartridge sizes are available upon request.

1

BCR 400 V-Plus

a two-component anchoring adhesive based on styrene free Vinylester suitable for both horizontal and vertical anchoring in concrete, solid masonry, etc.

BCR400 V-PLUS is available in 400ml cartridge. Other cartridge sizes are available upon request.

1
CIKO AT GLANCE

CIKO

 

Complex Building

 

Advance Technology