Groutss
PRODUCT DESCRIPTION

CIKO grout factory blended powder consisting of high quality plasticizer, non-mettalic filler single component when added to water produce flowable mix to fill gap while shrinkage is contained, the addition of expansion agent control volume change during plastic and early hardened state. For higher strength and fine gap subject to movement such as under heavy equipment and micro cracks, CIKO Grout EP offer high early and final strength  to withstand static and dynamic load .

 

TECHNICAL INFORMATION

Cementitious Grouts

 

Pagel ®- Grout 501

Non‐shrink, free flow, high strength cementitious grout for filling gaps between similar or dissimilar substrates up to 120mm thickness in one application.

25 kg bag yield 13.0 liters of grout

Grout GP1

General purpose, non‐shrink, free flow, high strength cementitious grout for filling gaps between similar or dissimilar substrates.

25 kg bag yield 13.0 liters of grout

Grout HIFO1

Non‐shrink, free flow, high strength cementitious grout for filling gaps between similar or dissimilar substrates having larger area. Suitable for large size base plate grouting and rail grouting

 

25 kg bag yield 13.0 liters of grout

Grout CON1

Non‐shrink grout admixture suitable for anchoring precast columns, anchor bolts, general void filling etc.

1 – 2% by weight of cement

Grout PC1

Cementitious pile cap resurfacing grout

25 kg bag yield 13.0 liters of grout

 

Epoxy Grouts

 

Grout EP1

Chemical resistant, epoxy resin based high strength grout. Ideal for grouting heavy machinery base plates, anchors, turbine base, rails etc.

25 kg bag yield 12.5 liters

Grout ING1

Solvent free two‐component epoxy resin based low viscosity injecting grout recommended for filling cracks in concrete. Suitable for structural concrete repair

4.0 liters pack

Grout EPC1

Epoxy based pile cap resurfacing grout

25 kg bag yield 12.5 liters of grout

CIKOdowel Grout1

Epoxy resin based, high strength dowel grout

Available in 1.0 and 4.0 liter packs

 

Tile Grouts

 

Tile Grout1

Cement based pre‐mixed tile grout for horizontal and vertical applications to fill gaps between tiles. Available in a wide range of colours

10 kg pack yield 5.0 liters of grout

Tile Grout SP1

Antifungal grout for tile joints suitable for underwater and moist conditions

10 kg bag yields 5.0 liters

Tile Grout EP1

Epoxy based tile grout for horizontal and vertical applications to fill gaps between tiles. Available in a wide range of colours

14 kg kit yields 10.0 liters

Tile Grout EPW1

Epoxy based water cleanable and chemical resistant coloured tile grouts

14 kg kit yields 10.0 liters

CIKO AT GLANCE

CIKO

 

Complex Building

 

Advance Technology