Protective Coatings & Sealers
PRODUCT DESCRIPTION

Coat range designed to cover different area of application where chemical and abrasion resistance is of major concern where the substrate is in direct contact with diluted chemical or contaminated and effluent solution. Coat anti carbonation decorative and protective coating with main function as a water repellent system developed to protect against chloride and sulphate attack using high technology safeguard the structure to prevent passage of vapor to attack the steel reinforcement  while  environmental safety remain intact .

 

TECHNICAL INFORMATION

Coatings

 

Coat EP 601

Solvented epoxy resin based coating. Used in industrial and commercial buildings as chemical and abrasion resistant coating

 

6.0 m2 per liter @ 100 microns

DFT

Coat EP 100 1

Solvent free epoxy resin based heavy‐duty coating. Used in industrial and commercial buildings as chemical and abrasion resistant coating

5.0 m2 per liter @ 200 microns

DFT

Coat EPW1

Epoxy based protective coating for water retaining structures

5.0 m2 per liter @ 200 microns

DFT

Coat T1001

Coal tar extended epoxy resin based protective coating and waterproofing system. Recommended on concrete or metal surface to provide chemical resistance and exhibits excellent resistance to soil chemicals

5.0 m2 per liter @ 200 microns

DFT

Coat RC701

Polyurethane resin based chemical resistant coating

7.0 m2 per liter @ 100 microns

DFT

Coat UV3331

Polyurethane resin based ultraviolet and chemical resistant coating

7.0 m2 per liter @ 100 microns

DFT

Paveseal1

Solvent free, two component protective coating system recommended on asphalt or concrete pavement which provides resistance to spillage of fuel, kerosene and other chemicals

5.0 m2 per liter @ 200 microns

DFT

Poxy Anti-dust1

Epoxy based anti-dust coating for cementitious substrates

10.0 – 14.0 m2 per liter depending on substrate type and condition

Primers

Coat Prim 111

Low viscosity, solvented, two component epoxy based primer

recommended for concrete/masonry substrates to isolate subsequent coatings from the alkalinity of the concrete

7.0 m2 per liter @ 100 microns

DFT

Coat Prim 141

Low viscosity, solvent free, two component epoxy based primer

recommended for concrete/masonry substrates to isolate subsequent coatings from the alkalinity of the concrete

5.0 m2 per liter @ 200 microns

DFT

 

CIKO AT GCLANCE

Mega Project

 

Complex Building

 

Advance Technology