WaterProof & Damp-proof Coatings
PRODUCT DESCRIPTION

PROOF & SEAL offer a wide range of waterproofing to protective concrete and steel structure against aggressive exposure to salty environment and contaminated soil. Furthermore, CiKO provide a high-tech range of elastomeric waterproofing system for use in wet area application, the different system from cementitious, acrylic, Polyurethane and bituminous base offer the customer choice to select from to protect and prolong the life of the structure

 

TECHNICAL INFORMATION

Cementitious Waterproofing

Proof 2K1

Two‐component flexible cementitious waterproof coating for horizontal and vertical application on concrete, plaster, masonry walls and water retaining structures

15.0 to 17.0 m2 per 30 kg pack @ 1mm thick coat in two coats

Stop FS1

Fast setting hydraulic cement based plugging material. Used to plug running water in basement or water tank to stop loss of water immediately and to fix permanent waterproof systems. Sets in less than a minute.

Each 10kg pack yield 5.0 liters

 

Plug RS1

Fast setting hydraulic cement based plugging material. Used to plug running water in basement or water tank to stop loss of water immediately and to fix permanent waterproof systems. Sets in less than two minutes.

Each 10kg pack yield 5.0 liters

 

Proof WWP1

Latex modified cement based water and weather resistant coating on concrete, mortar and clay / cement block masonry surfaces. Most suitable to use in cladding towers as water and weather resistant coating below any kind of cladding

13.0 to 15.0 m2 per 30 kg pack @ 1mm thick coat in two coats

Proof Coat1

Single component cementitious waterproof coating for application on concrete, plaster and block masonry surfaces

18.0 – 20.0m2 per 25 kg pack @ 1mm thick coat

 

Acrylic Based Membrane Coatings

 

Proof AC1

Acrylic latex based waterproof membrane coating on concrete, polyurethane foam, mortar and cement block masonry surfaces. Exhibits excellent resistance to ultraviolet [UV] rays

2.0 liter per m2 @ 1mm DFT in minimum two coats

Proof SA1

Modified acrylic latex based waterproof membrane coating on

concrete, polyurethane foam, mortar and cement block masonry

surfaces

2.0 liter per m2 @ 1mm DFT in minimum two

coats

 

Polyurethane Membrane Coatings

 

Proof PU 1

High solids, tar extended polyurethane resin based waterproof membrane coating for concrete, mortar and cement block masonry surfaces

1.2 liter per m2 @ 1mm DFT in two coats

Proof PU1001

Polyurethane resin based moisture curing material. It forms seamless and watertight elastomeric membrane upon curing. Used in wet area waterproofing, below ground waterproofing and exterior surface of water retaining structures

1.2 liter per m2 @ 1mm DFT in minimum two coats

 

Bitumen Based Waterproofing Materials

 

Seal1

High solids bitumen emulsion coating. Applied on concrete, mortar and cement block masonry surfaces. Provides excellent resistance to soil chemicals. Used in foundation waterproofing

3.0 m2 per liter per coat. Minimum two coats

Seal N1

Bitumen emulsion coating. Applied on concrete, mortar and cement block masonry surfaces. Provides excellent resistance to soil chemicals. Used in foundation waterproofing

3.0 m2 per liter per coat. Minimum two coats

Seal SB1

Solvent based bitumen coating. Applied on concrete, mortar and cement block masonry surfaces. Provides excellent resistance to soil chemicals. Used in foundation waterproofing

3.0 m2 per liter per coat. Minimum two coats

Seal RB1

High solids, rubberized bitumen emulsion coating. Applied on concrete, mortar and cement block masonry surfaces. Provides excellent resistance to soil chemicals. Used in foundation waterproofing

3.0 m2 per liter per coat. Minimum two coats

Seal RB-N1

Rubberized bitumen emulsion coating. Applied on concrete, mortar and cement block masonry surfaces. Provides excellent resistance to soil chemicals. Used in foundation waterproofing

3.0 m2 per liter per coat. Minimum two coats

 

 

Seal FB1

Fiber reinforced bitumen emulsion for build‐up waterproofing system. Complies with ASTM D1227 for build‐up waterproofing membranes

3.0 m2 per liter per coat. Minimum two coats

Primer WB1

Water based bitumen emulsion primer. Used as primer for other range of emulsified bitumen based topcoats

5.0 – 8.0 m2 per liter

Primer SB1

Solvent based bitumen primer. Complies with ASTM D41. Used as a primer for torch applied waterproofing membranes and for solvent based bitumen topcoats

5.0 - 6.0 m2 per liter

CIKO AT GLANCE

Mega Project

 

Complex Building

 

Advance Technology